METACREATIONS KPT 6
SOFTWARE LICENSE AGREEMENT 


NOTICE
Please read this License Agreement carefully before proceeding. This Agreement 
grants you a non-exclusive, non-transferable license to use MetaCreations KPT 
6 and accompanying documentation (the "Software") and contains warranty and 
liability disclaimers. By selecting the "I Agree" button, you are confirming 
your acceptance of the Software and agreeing to become bound by the terms of 
this Agreement.

LICENSE
This Agreement allows you to: (a) install and use the Software on only one 
computer; (b) make one (1) copy of the Software in machine readable form solely 
for backup purposes, provided that you reproduce all copyright notices and any 
other proprietary notices on the copy; and (c) physically transfer the Software 
from one computer to another, provided that the Software is removed from the 
computer on which it was originally installed and is used on only one computer 
at a time.

RESTRICTIONS
You may not use the Software on more than one computer at a time. You may not 
modify, translate, reverse engineer, decompile, or disassemble the Software, or 
otherwise reduce the Software to a human-readable form. You may not copy the 
Software (except for a single backup copy). You may not sell, license, rent, 
transfer, or grant any rights in the Software in any form to any person or 
entity without the prior written consent of MetaCreations Corporation 
("MetaCreations").

OWNERSHIP
This license gives you limited rights to use the Software. You do not become of 
owner of the Software, and MetaCreations retains all title to the Software and 
all copies thereof. All rights not specifically granted in this Agreement, 
including United States and international copyrights, are reserved by 
MetaCreations. Unauthorized copying of the Software, or failure to comply with 
the restrictions set forth in this Agreement, will result in automatic 
termination of this license and will make available to MetaCreations all other 
legal remedies.

LIMITED WARRANTY AND DISCLAIMER
MetaCreations warrants that, for a period of ninety (90) days from the date of 
delivery to you as evidenced by a copy of your receipt, the medium on which the 
Software is furnished will, under normal use, be free from defects in material 
and workmanship. Except as stated in this section, the Software is provided to 
you on an "AS IS" BASIS WITHOUT ANY WARRANTY OF ANY KIND EITHER EXPRESSED OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. MetaCreations does not warrant that the 
functions contained in the Software will meet your requirements or that the 
operation of the Software will be uninterrupted or error-free. No distributor, 
dealer or any other entity or person is authorized to expand or alter either 
this disclaimer of warranty or this Agreement. Any such representations will not 
bind MetaCreations. You assume the entire risk as it applies to the quality and 
performance of the Software. Should the Software prove defective you (and not 
MetaCreations) assume the entire cost of all-necessary servicing repair or 
correction.

SOME STATES OR OTHER JURSIDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED 
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER 
RIGHTS THAT VARY FROM STATE TO STATE AND JURISDICTION TO JURISDICTION.

REMEDIES
Should you receive a copy of the Software medium, which you believe is 
defective, your remedy is to return the defective medium to MetaCreations or an 
authorized MetaCreations distributor or dealer with a copy of your receipt and 
obtain replacement medium containing the Software.

LIMITATION OF REMEDIES
You assume full responsibility for the selection of the Software to achieve your 
intended results and for the installation, use and results obtained from the 
Software. IN NO EVENT WILL METACREATIONS OR ITS REPRESENTATIVES BE LIABLE FOR 
LOSS OF DATA, LOST PROFITS, COST OF COVER, OR OTHER SPECIAL, INCIDENTAL, 
PUNITIVE, CONSEQUENTIAL OR INDIRECT DAMAGES OR LOSSES ARISING FROM THE USE OF 
THE SOFTWARE, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMIATION 
SHALL APPLY EVEN IF METACREATIONS OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. The limitation of warranty and 
limited liability set forth above are fundamental elements of the basis of the 
bargain between MetaCreations and you. You agree that MetaCreations would not be 
able to provide the Software on an economic basis without such limitations.

SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY 
TO YOU.

US GOVERNMENT RESTRICTED RIGHTS
If you are acquiring the licensed Software on behalf of any part of the U.S. 
Government, the following provisions apply. The Software and accompanying 
documentation (if any) are deemed to be "commercial computer software" and 
"commercial computer software documentation," respectively, pursuant to DFAR 
Section 227.7202 and FAR 12.212(b), or other comparable or more recent 
government law or regulation, as applicable. Any use, modification, 
reproduction, release, performance, display or disclosure of the Software and/or 
accompanying documents by the U.S. Government or any of its agencies shall be 
governed solely by the terms of this Agreement and shall be prohibited except to 
the extent expressly permitted by the terms of this Agreement.

GENERAL
This Agreement is governed by the laws of the state of California, including its 
Uniform Commercial Code (except that federal law governs copyrights and 
trademark(s)). You hereby agree that the Federal and State Courts in and for the 
South County of Santa Barbara, California, U.S.A. shall have exclusive 
jurisdiction and venue to adjudicate any and all disputes arising out of or 
relating to this Agreement or the Software. This Agreement is the entire 
agreement between us and supersedes any other communications or advertising with 
respect to the Software. If any provision of this Agreement is deemed invalid or 
unenforceable pursuant to applicable law including, but not limited to, the 
warranty disclaimers and liability limitations set forth above, then the invalid 
or unenforceable provision will be deemed superseded by a valid, enforceable 
provision that most closely matches the intent of the original provision and the 
remainder of the Agreement shall continue in effect.

All questions concerning this Agreement should be directed to MetaCreations 
Corporation, at 6303 Carpinteria Avenue, Carpinteria, CA 93013, Attention 
General Counsel.

(c) 1999 MetaCreations Corporation. KPT, Kai's Power Tools, and MetaCreations 
are registered trademarks, and MetaCreations Painter and the MetaCreations logo 
are trademarks of MetaCreations Corporation. All other product names mentioned 
in the Program, manual or other documentation are used for identification 
purposes only and may be trademarks or registered trademarks of their respective 
companies.

TECHNICAL SUPPORT OPTIONS
Register today to become eligible for technical support. MetaSupport(tm) is a 
portfolio of free and fee-based support options designed to provide quality 
support to you. For more details, see the METASUPPORT.PDF file installed onto 
your computer. It is also posted at: www.metacreations.com.

A technical support readme (entitled "TECHTIPS" on the PC, and "Technical Tips" 
on the Macintosh) is also provided to make installing and using KPT 6 as simple 
as possible. This readme includes the following: installation notes and 
procedures, system requirements, technical notes, and FAQ.

International Technical Support

MetaSupport telephone support services are available in the U.S. and Canada 
only. If you live elsewhere, please contact the international distributor 
nearest you for sales, service, and technical support. To locate your nearest 
distributor, go to: www.metacreations.com/support/intl. Choose Customer Support, 
then click on Sales Info/International Distributor.

GENERAL INSTALLATION NOTES
KPT 6 is a collection of image filter plug-ins that require Adobe Photoshop or 
a compatible host application. KPT must be installed into the same folder in 
which your host looks for plug-ins. Refer to your host application's user guide 
to determine into which folder KPT must be installed.

WINDOWS INSTALLATION PROCEDURES
Windows 95, 98, 2000, NT4.0

1. Insert the KPT 6 CD-ROM into your CD-ROM drive.

2. KPT's installer screen appears. Click the "Install" option.

3. KPT's welcome screen appears.

4. Click the "Browse" option to locate your host application's "plug-ins" 
folder.

5. When you have a complete path statement ending with your plug-ins folder, 
click the "OK" option.

6. Click the "Next" option.

7. Click the "Next" option, and follow the prompts to completion.

After completing installation, simply run your host application, such as 
Photoshop or MetaCreations Painter(tm), and choose a KPT 6 plug-in from within 
the "Filter" menu.

WINDOWS INSTALLATION TIPS
Ensure that your operating system is Win95, 98, 2000, NT4.0 (KPT 6 does not run 
on Win 3.x or NT 3.x.x), and that your display is set to a minimum of 24-bit 
color (true color). Also ensure that you are using a Pentium processor or 
"Pentium class" processor (KPT 6 does not run on an i486(tm)), that you have no 
open applications, and that there are no applications running in the background 
(this includes anti-virus software, crash monitoring software, and system 
diagnostic software).

MACINTOSH INSTALLATION PROCEDURES
Power Macintosh

1. Insert the KPT 6 CD-ROM into your CD-ROM drive.

2. If a window displaying the contents of the CD-ROM does not open 
automatically, locate and double-click the KPT 6 CD-ROM icon to view its 
contents.

3. Locate the KPT 6 folder on the KPT CD-ROM, and double-click the KPT 6 
installer icon to begin installation.

4. The installer prompts you to locate your Plug-ins folder. This folder is 
likely within the Photoshop application folder, or within the folder of a 
compatible host such as MetaCreations Painter.

5. Click "Install" in the main install window, or choose the "Custom" install 
menu for more options, if available.

After completing installation, simply run your host application, such as 
Photoshop or MetaCreations Painter, and choose a KPT 6 plug-in from within the 
"Filter" menu.

MACINTOSH INSTALLATION TIPS
Ensure that your Mac OS is 7.6.1 or later, and your display is set to a minimum 
of 24-bit (millions of colors). Also ensure that you have no open applications, 
and that there are no applications running in the background (this includes 
anti-virus software, crash monitoring software, and system diagnostic software).

